Home > Calculators > Heat Pump Savings Calculator
Work out what a heat pump would really cost to run in your home in the USA, UK & Canada, compared with the heating you have now. Enter your current fuel use and we do the rest — no sign-up, no email, just the numbers.
A heat pump does not always beat cheap natural gas — on the US and UK defaults below it actually costs a little more to run, and this calculator will tell you so plainly. Against oil, propane or electric resistance heating it usually saves a lot. Your result depends mainly on your fuel prices and the heat pump's COP (efficiency), so try a few values.
In the UK, the Boiler Upgrade Scheme (BUS) grant is £7,500 — that is the calculator's UK default above. Homes heated by oil or LPG with no mains gas connection can get £9,000 instead for applications made from 21 July 2026 to 31 March 2027, for air-to-water or ground-source heat pumps only (per GOV.UK). Heat-pump tariffs also change the UK maths: a dedicated heat-pump or off-peak electricity tariff can make a heat pump cheaper to run than the standard-tariff result shown here. See our Methodology page for how grants and rates are handled.
Current annual cost = fuel price × annual fuel use.
Useful heat your current system delivers = annual fuel use × energy per unit of fuel (kWh) × (efficiency ÷ 100).
Heat pump electricity use = useful heat ÷ COP. Heat pump annual cost = heat pump electricity use × electricity rate.
Annual saving = current annual cost − heat pump annual cost. Percentage saving = annual saving ÷ current annual cost × 100. Ten-year saving = annual saving × 10. Install payback = (installed cost − grant) ÷ annual saving, shown only when there is a saving.
No. Where natural gas is cheap, a heat pump can cost more to run than a modern gas boiler or furnace. With the US defaults on this page, the heat pump costs about $105 a year more than gas. Against oil, propane or electric resistance heating, a heat pump usually saves a lot.
COP is how many units of heat a heat pump delivers for each unit of electricity. Use 2.5 for a cold climate or an older unit, 3.0 for a typical air-source heat pump, 3.5 for a mild climate or a high-end unit, and 4.5 for a ground-source (geothermal) system. The figure is a seasonal average, not performance on the coldest day.
A boiler or furnace rated at 85% efficiency turns only 85% of its fuel into useful heat; the rest is lost. A less efficient current system needs more fuel to deliver the same heat, so replacing it with a heat pump saves more. Enter your system's real efficiency if you know it.
Payback is the net installed cost (installed cost minus any grant) divided by the yearly saving. If the heat pump costs more to run than your current system, there is no payback on running costs alone. Grants can change the picture a lot — in the UK the default grant brings the net cost down sharply.
No — at the US defaults on this page, the heat pump costs $105 a year more than gas, a saving of −$105 a year. It wins big against oil, propane and electric resistance heating, which all cost far more per unit of heat than gas.
Oil is the most expensive common fuel per unit of heat, so savings versus oil are usually the largest of any switch. See the ranked numbers on our Heating Cost Comparison page.
Free to use on your own website with a credit link back to WattWorth Calc.